flamenco

Flamenco Model
The Flamenco Model follows a Santos Hernandez design. Cypress is used as standard for the back and sides and the guitar is lightly built with a low action. The combination of authentic design and wood give the guitar a traditional dry flamenco tone and quick response. Clear golpeadors are fitted as standard. Pegs can be used if desired which further reduces the weight of the instrument and adds to the authenticity. An oil finish is used as standard, which gives the guitar a satin sheen and adds to the organic feel of the guitar.

Flamenco model specifications
Measurements (mm)

For guidance only - guitars may be customised
to individual specifications as required

Scale length
650
Fingerboard width at nut
52
Fingerboard width at 12th fret
62
Soundhole radius
43
Body length
485
Waist
236
Lower bout width
363
Upper bout width
274
Maximum rib depth
95


	Flamenco Model The Flamenco Model follows a Santos Hernandez design. Cypress is used as standard for the back and sides and the guitar is lightly built with a low action. The combination of authentic design and wood give the guitar a traditional dry flamenco tone and quick response. Clear golpeadors are fitted as standard. Pegs can be used if desired which further reduces the weight of the instrument and adds to the authenticity. An oil finish is used as standard, which gives the guitar a satin sheen and adds to the organic feel of the guitar. Flamenco model specifications Measurements (mm) For guidance only - guitars may be customised to individual specifications as required Scale length 650 Fingerboard width at nut 52 Fingerboard width at 12th fret 62 Soundhole radius 43 Body length 485 Waist 236 Lower bout width 363 Upper bout width 274 Maximum rib depth 95
	Designed By Sergio and Kit Multimedia Holdings